NY ONIX TOCATA XM2 CU - Portable Audio Player WiFi Bluetooth 5.2 aptX HD LDAC 32bit 768kHz DSD512 - Copper

Name: ONIX TOCATA XM2 CU - Portable Audio Player WiFi Bluetooth 5.2 aptX HD LDAC 32bit 768kHz DSD512 - Copper
Brand: ONIX
SKU: ONIX-XM2-COPPER
Price: 606.24 EUR
Availability: InStock

Artikelnr.: ONIX-XM2-COPPER

NY ONIX TOCATA XM2 CU - Portable Audio Player WiFi Bluetooth 5.2 aptX HD LDAC 32bit 768kHz DSD512 - Copper

Artikelnr.: ONIX-XM2-COPPER

PÅ LAGER!

Leveret til dig inden for 4-5 dage

606,24 Eur _{incl.VAT / 484,99 Eur excl.VAT}

Bonuspoint: 60,62 Eur

The ONIX TOCATA XM2 CU is the limited solid-copper edition of the XM2, combining the series' exceptionally compact format with a distinctive, more substantial metal chassis. Its dedicated music system focuses solely on playback, local files and network functions.

The eight-channel Cirrus Logic CS4308P DAC, fully balanced signal path and Brighton I/V circuit provide precise digital-to-analog conversion. The player offers both 3.5mm single-ended and 4.4mm balanced headphone outputs, with up to 800mW at 32 ohms from the balanced connection.

MicroSD local playback, Tidal streaming, DLNA and AirPlay networking provide direct access to music libraries and services. Two-way Bluetooth, USB DAC mode and USB digital output allow the player to integrate flexibly into portable and home audio systems.

Gave

Detaljer
Data
Udtalelser fra

LIMITED COPPER EDITION · COMPACT HI-FI MUSIC PLAYER

ONIX XM2 CU

The limited-production copper edition of the ONIX Tocata XM2. A full copper alloy chassis with a red copper finish and an anti-oxidation protective layer. Inside, the same fully balanced Cirrus Logic CS4308P-based signal path delivers up to 800 mW into 32 Ω. According to the manufacturer, the copper chassis brings a warmer, richer sound and a darker background.

Full copper alloy chassisLimited editionCirrus Logic CS4308P DAC800 mW balanced, 32 ΩPCM 768 kHz / DSD512

ONIX XM2 Cu limited copper edition portable hi-fi music player

The ONIX XM2 Cu is a special edition of the brand's most compact music player. The aluminium chassis of the Tocata XM2 is replaced by one made entirely of copper alloy. This changes more than the look: according to the manufacturer, the higher density and better shielding of copper also make an audible difference.

The internal electronics are identical to the standard model: the same eight-channel Cirrus Logic DAC, the same Brighton I/V stage and the same fully balanced output amplifier. The only difference is the material and finish of the chassis. The XM2 Cu is made for listeners who want a unique, collectible piece in a compact player they can use every day.

208 gSolid copper alloy chassis, versus 140 g for the aluminium edition

800 mWBalanced output into 32 Ω, high gain

DSD512Native DSD and PCM 768 kHz / 32-bit

8.5 hoursContinuous playback from a 3000 mAh battery

WHY COPPER? THE CU EDITION CHASSIS

ONIX XM2 Cu limited copper edition in the spotlight — Limited copper edition with red copper finish and anti-oxidation layer

The main chassis of the XM2 Cu is made entirely of copper alloy. Its rich red copper finish is protected by a durable anti-oxidation layer, so the player keeps its distinctive colour for a long time. According to the manufacturer, it feels smoother and noticeably denser in the hand than the aluminium base model.

Copper is denser than aluminium and shields better. The heavier chassis is less prone to resonance, and the shielding protects against external electromagnetic interference. ONIX credits this for the lower distortion and darker background of the CU edition.

Limited production

The XM2 Cu is a limited copper edition from ONIX, produced only in restricted quantities. If you want the CU edition, don't wait too long: once stock runs out, restocking is not guaranteed.

Higher densityThe solid copper alloy chassis weighs 208 g and is less prone to resonance than lighter aluminium.

Better shieldingCopper protects more effectively against external electromagnetic interference, which shows in a quieter background.

Protected finishThe anti-oxidation layer preserves the red copper colour and the smooth feel of the chassis.

SAME ELECTRONICS, DIFFERENT SOUND CHARACTER

Both editions share the same internal design; according to the manufacturer, the difference in sound comes from the chassis material. The aluminium XM2 is clean, neutral and energetic. The copper CU edition adds a warmer, fuller tone to the same clarity.

The Cirrus Logic CS4308P DAC of the ONIX XM2 — Identical electronics in both editions, built around the Cirrus Logic CS4308P

Tocata XM2 · aluminium

Clean, transparent and powerful sound: energetic yet controlled bass, neutral midrange and smooth, non-fatiguing treble. A good choice when accuracy and low weight matter most.

XM2 Cu · copper

According to the manufacturer: warmer and richer tones while preserving clarity, enhanced dynamics and more transparent treble, plus lower distortion, a darker background and better detail retrieval.

FLAGSHIP DAC AND BRIGHTON I/V STAGE

ONIX was born in Brighton, England, in the 1980s and still puts British hi-fi tuning at the centre of its products. The XM2 family is the first ONIX model to use the Cirrus Logic eight-channel CS4308P DAC. The chip handles PCM up to 768 kHz / 32-bit and native DSD up to DSD512.

The DAC's current output is converted to voltage by the in-house Brighton I/V stage, named after the brand's hometown and built around two low-noise OPA1612 op-amps. Headphones are driven by parallel SGM8262 amplifiers in a fully balanced topology. The digital clock is managed by an FPGA and two dedicated crystal oscillators to reduce jitter and keep timing precise.

Cirrus Logic CS4308P eight-channel DAC — Cirrus Logic CS4308P, eight-channel flagship DAC

The two OPA1612 op-amps of the Brighton I/V stage — Brighton I/V stage with two OPA1612 op-amps

Two SGM8262 amplifiers in the balanced output stage — Two SGM8262 in the fully balanced output stage

CS4308P DACThe first ONIX player with Cirrus Logic's eight-channel flagship DAC.

FPGA clockingTwo crystal oscillators and FPGA control for a stable, low-jitter digital path.

0.0005% THD+NExtremely low distortion into 32 Ω, thanks to the fully balanced analogue design.

3.5 MM AND 4.4 MM OUTPUTS WITH TWO GAIN LEVELS

The XM2 Cu offers a 3.5 mm single-ended and a 4.4 mm balanced headphone output. The balanced output delivers four times the power, with a higher signal-to-noise ratio and much better channel separation, giving plenty of headroom even for harder-to-drive headphones.

Low gain

For sensitive in-ear monitors (IEMs). Finer volume control and a lower noise floor, with 51 mW single-ended and 200 mW balanced into 32 Ω.

High gain

For full-size headphones. Delivers 204 mW single-ended and 800 mW balanced into 32 Ω, so dynamic peaks stay clean and undistorted.

The volume knob and headphone outputs of the ONIX XM2 — 3.5 mm and 4.4 mm headphone outputs next to the volume knob

Close-up of the ONIX XM2 buttons and jacks — Metal playback buttons, Fn button and gold-plated jacks up close

On mobile, swipe the table sideways to see all columns. ↔

Parameter	3.5 mm single-ended	4.4 mm balanced
Output power, 32 Ω, low gain	51 mW	200 mW
Output power, 32 Ω, high gain	204 mW	800 mW
Signal-to-noise ratio	121 dB	124 dB
Channel separation	73 dB	112 dB
Output impedance	0.4 Ω	0.7 Ω

Manufacturer data. The audible difference also depends on the sensitivity and impedance of the connected earphones or headphones.

TOUCHSCREEN, REAL BUTTONS, A SYSTEM BUILT FOR MUSIC

The music-optimised system and display of the ONIX XM2 — Music-optimised in-house system, 3-inch OLED touchscreen

The 3-inch OLED touchscreen offers deep blacks, vivid colours and wide viewing angles, and the image can be rotated in four directions. The player does not run Android but ONIX's own system, optimised purely for music playback. It boots quickly and is free of unnecessary apps and notifications.

The system offers a 10-band graphic EQ, user and factory presets, and four selectable digital filters. Playback can be controlled from your pocket with the front metal buttons, the customisable Fn button and the knurled volume knob, which also turns the screen on and off.

WIRELESS AND USB TOO

The XM2 Cu is more than a local music player. It can act as a streaming source, a wireless transmitter and receiver, and a USB DAC for your computer.

Two-way Bluetooth 5.2

Sends to wireless headphones via LDAC, aptX HD, aptX, AAC or SBC, and receives music from your phone as a receiver.

Wi-Fi streaming

2.4 and 5 GHz Wi-Fi, built-in Tidal, plus DLNA and AirPlay for network music libraries. Tidal availability may vary by region.

USB DAC

Over its two-way USB-C connection it works as an external sound card for a computer or phone, and also as a digital output. It can be controlled from your phone with the SyncLink app.

Two-way Bluetooth on the ONIX XM2 — Two-way Bluetooth 5.2 with LDAC and aptX HD

ONIX XM2 portable hi-fi music player — Wi-Fi, Bluetooth and a USB DAC in one compact player

PALM-SIZED, AND ON YOUR PHONE WITH A MAGNETIC CASE

The XM2 is the smallest ONIX player: it fits in your palm and pocket, yet it is a fully fledged hi-fi source. The copper edition's denser 208 g chassis sits well in the hand, and the physical buttons and volume knob can be used without looking.

The compact size of the ONIX XM2 — Compact form that is easy to carry in a pocket

The palm-sized ONIX XM2 in hand — Palm-sized, with physical buttons for one-handed use

A magnetic leather case for the XM2 is available separately in several colours. With the case, the player attaches to the back of your phone, so you can carry both in one hand as a single unit.

ONIX XM2 magnetic leather cases in several colours — Magnetic leather case in several colours, sold separately

ONIX XM2 in a magnetic case attached to the back of a phone — Magnetic case that attaches to the back of your phone

ONIX XM2 in its case together with a phone — Player and phone as a single unit

The case is not included

The magnetic leather case is an accessory sold separately. The images show the aluminium base model in the case.

WHERE THE XM2 CU SITS IN THE ONIX RANGE

ONIX portable players follow two directions. The Overture XM5 and the Waltz XM10 offer more power and more features in a larger body. The Tocata XM2, by contrast, delivers the brand's tuning and design in the smallest, most portable form. The XM2 Cu takes that same compact player to collector level.

Compact

Tocata XM2

The base model in an aluminium chassis, 140 g. The lightest entry into the ONIX sound.

Limited copper

XM2 Cu

Identical electronics in a full copper alloy chassis: warmer, fuller sound and a collector's finish.

Upper class

Overture XM5

ESS ES9039PRO DAC, more than 1 W balanced output and a 7000 mAh battery.

Limited titanium

Overture XM5 Ti

Titanium alloy chassis, numbered limited edition, tuned for high-end IEMs.

Android

Waltz XM10 Ltd

6-inch display, Android 13 and an AKM DAC for full freedom with streaming apps.

On mobile, swipe the table sideways to see all columns. ↔

Model	Chassis	DAC	Balanced power, 32 Ω	System and display	Weight	Recommended for
Tocata XM2	Aluminium	Cirrus Logic CS4308P	800 mW	In-house music system, 3" OLED	140 g	Those looking for the smallest, lightest ONIX player
XM2 Cu	Copper alloy, limited edition	Cirrus Logic CS4308P	800 mW	In-house music system, 3" OLED	208 g	Those who want a warmer sound and a collector's finish in a compact size
Overture XM5	Aluminium	ESS ES9039PRO	1069 mW	In-house music system, 3" OLED	275 g	Those who need more power and longer battery life for bigger headphones
Overture XM5 Ti	Titanium alloy, numbered limited edition	XM5-based, retuned output stage	–	In-house music system, 3" OLED	approx. 327 g	High-end IEMs and collectors
Waltz XM10 Ltd	–	AKM AK4191 + AK4499EX	877 mW	Android 13, 6" display	–	Those who also want to install streaming apps

Manufacturer data, showing each model's role within the range. The table is not a quality ranking: the right choice depends on your earphones, how you use the player and the sound you prefer.

WHO IS THE XM2 CU FOR?

Listeners on the move

It fits in your pocket yet delivers 800 mW balanced, replacing the phone-plus-dongle combination with a single device.

Fans of a warmer sound

According to the manufacturer, the copper chassis gives a fuller tone and a darker background while keeping the clarity and dynamics of the XM2.

Collectors

A limited-production copper edition with a unique look that stands out from conventional aluminium players.

Choose the XM2 Cu if…

…you want the most compact ONIX player but with a warmer, fuller sound than the aluminium base model and a special, limited finish. If the lowest weight is your priority, the aluminium Tocata XM2 is also a good choice. If you need more power and longer battery life, take a look at the Overture XM5.

SPECIFICATIONS

PRODUCT TYPE

Portable digital audio player (DAP), limited copper edition

CHASSIS

Full copper alloy main chassis, red copper finish with anti-oxidation layer

WEIGHT

208 g

DAC

Cirrus Logic CS4308P, 8-channel

AMPLIFIER STAGE

Parallel SGM8262, Brighton I/V conversion, fully balanced topology

SUPPORTED RESOLUTION

PCM up to 768 kHz / 32-bit, native DSD512

OUTPUTS

3.5 mm single-ended, 4.4 mm balanced, USB-C

OUTPUT POWER

Single-ended: 51 / 204 mW, balanced: 200 / 800 mW, into 32 Ω, low / high gain

FREQUENCY RESPONSE

20 Hz – 40 kHz (−0.5 dB)

THD+N

0.0005%, into 32 Ω

SIGNAL-TO-NOISE RATIO

121 dB single-ended, 124 dB balanced

CHANNEL SEPARATION

73 dB single-ended, 112 dB balanced

PROCESSOR AND SYSTEM

Ingenic X2000, in-house music-optimised operating system

DISPLAY

3-inch OLED touchscreen, image rotatable in four directions

WIRELESS

Two-way Bluetooth 5.2 (LDAC, aptX HD, aptX, AAC, SBC), 2.4 / 5 GHz Wi-Fi

STREAMING

Tidal, DLNA, AirPlay

STORAGE

microSD card slot, up to 2 TB

BATTERY

3000 mAh, up to 8.5 hours of continuous playback, USB-C charging (5 V, 2 A)

SUPPORTED FILE FORMATS

APE, FLAC, WAV, AIFF, ALAC, DSD, MP3, AAC, M4A, WMA, OGG, OPUS, AC3

WHAT'S IN THE BOX?

The package contains the player and the cable you need to get started. A microSD card for storing music must be purchased separately.

ONIX XM2 CU

1 × limited copper edition portable hi-fi music player

CABLE

1 × USB-C charging and data cable

DOCUMENTATION

1 × user manual

CARE AND USE

The copper surface is protected by a durable coating. Clean it with a soft, dry microfibre cloth and avoid abrasive, solvent-based or metal cleaners, as these can damage the protective layer. Turn the volume down before connecting headphones. Use low gain for IEMs and high gain for full-size headphones.

Manufacturer

ONIX

Exact color

Copper

Model

XM2 Copper

Bluetooth

Yes

EAN

5060978090439

Artikelnr.

ONIX-XM2-COPPER

Vægt

500 g/piece

Vær den første til at bedømme dette produkt!

Flere anmeldelser og skriv anmeldelse