Select destination country for correct VAT
High-End Desktop Mono Amplifier Unit
The TOPPING B200 is a high-performance, ultra-clean sounding desktop mono power amplifier designed for demanding hi-fi systems, suitable for use in living rooms, dedicated listening rooms, or studio-like environments.
The B200 features a robust, minimalist, fully aluminum chassis that provides both an elegant appearance and a resonance-free foundation for the internal electronics. The compact dimensions (approx. 220 × 92 × 185 mm) belie its substantial weight due to the large toroidal transformer and extensive cooling, ensuring stable power delivery and reliable long-term operation.The front panel includes the power switch, input selector buttons, and LED indicators for input status, making daily operation simple and intuitive. At the rear are three balanced XLR / 6.35 mm TRS combo inputs, speaker terminals, a two-position gain switch, a 12 V trigger input, and the DC power connector. The high-quality connectors and logical layout facilitate easy integration into systems, whether simple hi-fi chains or more complex multi-source setups.
At the heart of the B200 is TOPPING's newly developed discrete NFCA (Nested Feedback Composite Amplifier) power stage, optimized for ultra-low distortion and noise. This topology delivers linear, neutral performance across and beyond the audible frequency range, with tight bass, clear midrange, and detailed highs while preserving musical dynamics.Specifications indicate total harmonic distortion plus noise (THD+N) remains extremely low at 0.00008% (4 Ω) and below 0.000075% (8 Ω) at 5 W, approaching measurement limits for essentially distortion-free human hearing. The 145 dB signal-to-noise ratio (SNR) and dynamic range ensure quiet passages and large dynamic swings emerge cleanly without compression.
Frequency response is ±2 dB from 20 Hz–40 kHz and ±0.4 dB up to 100 kHz, providing extended beyond-audible performance ideal for high-resolution content and phase-coherent imaging.
As a single-channel (mono) power amp, the B200 delivers 200 W nominal output at both 4 Ω and 8 Ω loads under 1% THD+N, with up to 240 W at 8 Ω (under 10% THD). This power suffices for most floorstanding and bookshelf speakers, including lower-sensitivity, demanding loads.Gain is adjustable in two stages: low (11.6 dB) for high-output DACs, preamps, or sensitive speakers, and high (22.0 dB) for greater headroom with lower-output sources. Output impedance below 5 mΩ ensures excellent load control and firm bass, even with long speaker cables.Minimum load impedance is 4 Ω, making it suitable for most modern 4–8 Ω speakers. Output voltage peaks at 80 Vpp (4 Ω) and 110 Vpp (8 Ω), confirming ample reserves.
For stereo, two B200 units are required—one per channel—reducing crosstalk, improving channel separation, and yielding a precise stereo image. The three XLR/TRS inputs allow multiple balanced sources or preamps to connect simultaneously, with input selection on the amp.Pairing two B200s with a Topping PRE90 preamp creates a high-end, practical setup with precise volume control, remote operation, and multiple inputs. With DACs like the Topping D90 III Discrete, fully balanced XLR chains ensure optimal SNR and signal integrity.The 12 V trigger input synchronizes power on/off with compatible devices, ideal for multi-component systems controlled by one button or remote.
Net weight is about 2.74 kg, gross with packaging around 6.2 kg, reflecting solid power supply and mechanical stability. Its compact size fits hi-fi racks, desks, or cabinets easily, but allow ventilation for heat dissipation.No built-in Bluetooth or networking; it's a pure analog power amp, appealing to purists building custom signal paths.
Class AB mono power amp with discrete NFCA circuit
1 (mono)
200 W @ 4 Ω (THD+N < 1%)200 W @ 8 Ω (THD+N < 1%)
240 W @ 8 Ω (THD+N < 10%)
20 Hz – 40 kHz (±2 dB)20 Hz – 100 kHz (±0,4 dB)
< 0,00008% @ 4 Ω; < 0,000075% @ 8 Ω
< 0,0005% @ 4 Ω; < 0,0004% @ 8 Ω
145 dB
80 Vpp @ 4 Ω; 110 Vpp @ 8 Ω
Low: 11,6 dBHigh: 22,0 dB
< 5 mΩ
10 kΩ
4 Ω
3 × balanced XLR / 6.35 mm TRS combo
Speaker binding posts
Yes (Trigger In)
Width: 220mm (8.66”)Height: 92mm (3.62”)Depth: 185mm (7.28”)
black, silver
Gross weight: 6200g (13.66 lbs)Net weight: 2740g (6.04 lbs)
1x Topping B2001x AC-DC power adapter (DC 64V / 3.75A (3-Pin))1x AC cable (EU)1x Product information card
